How to Connect Canon MG3600 Printer to Computer – Easy Guide

Pondering how to connect Canon MG3600 printer to computer? Well, look no further because your search has come to an end here. This detailed guide presents two efficient methods to address and resolve the connectivity issue on your printer.  

How to Connect Canon MG3600 Printer to Computer

In the digital era, the ability to print documents effortlessly from your computer to a printer is a necessity for both home and office environments.

The Canon Pixma MG3600 printer stands out for its affordability, reliability, and ease of use, making it a sought-after choice among users.

However, when it comes to connecting this printer to a computer the users find it really complicated and are unable to work it out.

If you are also in a position like this and want to connect your Canon MG3600 to a computer then you are in the perfect destination.

This inclusive guide discusses two methods with step-by-step instructions to assist you get over the line with this problem and establish a connection with your computer. Without any delay, let’s dive into it.

Methods for Connecting Canon MG3600 Printer to Computer

Before we delve into the methods, it is essential to do a couple of things as preparatory steps to ensure a smooth connection process. Firstly, install the ink cartridges into the printer, making sure they are properly placed and locked in place.

Secondly, load the type and size of paper that fits your requirements onto the paper tray of the printer. You can then follow any of the methods discussed in detail below.

Method 1: Connecting via USB Cable

The most straightforward method to connect your Canon MG3600 printer to a computer is via a USB cable that comes with the printer.

This method is ideal for users who prefer a stable and uninterrupted connection. The instructions you need to follow are given below.

Step 1: Install Printer Drivers

First of all, you have to install the required printer drivers on your computer. For this, visit the Canon official website to download and install the latest drivers for your Canon Pixma MG3600 printer.

Select the drivers compatible with your computer’s operating system and undergo the installation process when the download is completed.

Step 2: Connect USB Cable

Power on the printer and locate the USB cable port on your printer. The port is located on the back side of the printer in the right section.

Now, take the USB cable and plug one end of the cable into this port. Connect the other port to the USB port of your computer.

Note: The USB cable is usually present in the printer box you buy but in case you buy a used model or one without a box then you will have to buy an external cable to pull this method off.

Step 3: Computer Recognition

Your computer will now automatically detect the printer and a dialog box (installation setup) will open up on the screen.

Follow the on-screen steps to finish the installation process. The printer will then connect to the computer and you will be able to see it in the Devices and Printers tab.

Once the installation is done, try printing a test page to ensure the printer is properly connected and functional.

Related Article: How to Connect HP Envy 6455e to Wi-Fi

Method 2: Connection via Wi-Fi Protected Setup (WPS)

For those users preferring a wireless setup to avoid the clutter of cables, the Canon MG3600 also features a convenient connectivity option known as WPS (Wi-Fi Protected Setup) which allows us to connect wirelessly.

To secure a sustained wireless connection using the WPS, follow the instructions given below.

Step 1: Ensure Router Compatibility

To start things off, you have to verify that your Wi-Fi router supports the WPS push-button mode. You can do this by locating the WPS button on the panel of your router.

The WPS button can be identified by the two rounded arrows in a circle symbol. On some routers, the button may just be labeled as WPS.

Step 2: Activate WPS on Printer

Activating WPS on Canon MG3600 is a bit tricky but it should not be a worrisome thing if you follow these steps in order. First, on the printer’s control panel, press and hold the Wi-Fi button until the LED light flashes.

After that, you need to press the Black button and follow it up by pressing the Wi-Fi button immediately. When you do this, make sure that the Wi-Fi LED light flashes quickly after.

Step 3: Activate WPS on Printer

Now, move to your Wi-Fi router. You have to press and hold the WPS button for a few seconds until the main LED light and Wi-Fi LED light are lit up. This means that the connection was completed successfully.

You need to keep in mind that the WPS button on your router needs to be pressed within 2 minutes of activating the WPS on the printer. If you press it after the time limit, it will be redundant because the WPS will be deactivated on the printer.

Step 4: Install Printer Drivers

After connecting the printer with Wi-Fi, ensure you have the latest drivers of your Canon MG3600 printer installed on your computer.

Again, these drivers can be found on the official Canon website. Just consider the compatibility of the drivers with your computer before downloading them.

Important: In some cases, when the computer detects the printer it automatically installs all the required drivers for the printer. In this case, you don’t need to install the drivers again.

Step 5: Testing the Connection

Conclude the process by printing a test page, ensuring that the printer is connected to the network and can communicate with your computer without any stumbling blocks.

And that is all in the bag! You can now begin sending print jobs to your printer with both wired and wireless connections without any hesitation whatsoever.

In the event of you facing any hurdles, don’t be reluctant to seek help and information from the user manual of your printer. It is available on the Canon website.

Related Article: How to Turn Off HP Envy 6055e Printer

Conclusion

That concludes our article on how to connect MG3600 printer to computer. This guide elaborated on various solutions to ensure successful connectivity of your printer with the computer.

We hope that this article was highly valuable for you and that it makes wireless printing a straightforward task for you.

Frequently Asked Questions (FAQs)

1. Where is the USB port on Canon MG3600?

The USB port on a Canon MG3600 is located on the back side of the printer. There is a dedicated space for the port.

The port is placed exactly right next to the rest of the ports. This also includes the main power cable port of the printer.

2. Why won’t my canon printer connect to my computer via USB?

Well, there can be various reasons for your Canon printer not connecting to your computer via a USB cable. But the most common reason is the improper connection of the cable into the port.

The selection of the wrong port can also be a reason for this problem. Also, check both ends of the USB cable you are using and look for any signs of physical damage. If they are damaged, they will not function properly and therefore result in no connection.

3. Why is my Canon MG3600 not printing?

There can be multiple reasons for your Canon MG3600 printer not printing. Using the wrong drivers can cause issues in the proper functioning of the printer so make sure you are using the right printer drivers.

Another reason can be not selecting the printer as the default printer. So, access the printer settings on the computer and choose the Set as Default Printer option for your printer.